Panasonic SDRS150 SDRS150 User Guide - Page 83
CONNECTION AND RECOGNITION PROCEDURES, supplied into the USB terminal
UPC - 037988254460
View all Panasonic SDRS150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Connection and recognition procedures After the driver and software applications are installed, the unit must be connected to the PC and be correctly recognized by the PC. ≥ Connect after installing the driver and software applications. If you connect this unit to a PC before installation, this unit may not be properly recognized. ≥ If a CD-ROM is inserted in the PC, remove it. (If the CD launcher is running, wait until it finishes, then remove the CD-ROM.) ≥ If the recognition procedure is not accomplished properly, operation will not be possible after connecting the unit to the PC. ≥ If the unit fails to operate normally, it may mean that you have not conducted the installation or recognition procedure properly. ≥ Use AC adaptors as the power supply for the unit and the equipment connected to it. ¬ Connect this unit to the AC adaptor. 1 Select this unit's operation mode. Motion picture recording Web camera (P81) Motion picture playback Unavailable Still picture recording Web camera (P81) Still picture playback Unavailable PC Connection mode Card reader/writer function MotionSD STUDIO etc. (P85) ≥ When this unit is in still picture playback mode, connect it to a printer supporting PictBridge. (P70) 2 Open this unit's terminal cover, then firmly plug one end of the USB cable 1 (supplied) into the USB terminal and the other end into the terminal on the PC. ≥ Insert the plugs as far as they will go. The unit and PC will not operate properly if they are not inserted fully. ≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.) ≥ When the unit is set to PC Connection mode and connected to a PC, the operation mode cannot be changed and its power cannot be turned off. In this case, disconnect the USB cable (P89), change the operation mode and then turn off its power. 83 VQT0X39