Panasonic SDRS150 SDRS150 User Guide - Page 95
Setup Menu, Display], Beep Sound], Power Save], Initial Set], Demo Mode]
UPC - 037988254460
View all Panasonic SDRS150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Setup menu ∫ [ DISPLAY] ≥OFF ≥ON The screen indications are selected as shown in the illustration below. OFF ; 12:30 PM DEC 15 2006 ON SP R 0h00m 0h00m00s ; O.I.S. AUTO 12:30 PM DEC 15 2006 ∫ [ BEEP SOUND] ≥OFF ≥ON This allows operations such as starting and ending recording to be signalled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended. 1 Beep When you start recording or turn on the power. Also when deleting files, when the confirmation message appears while formatting and when this unit is recognized by the PC or the printer. 2 Beeps When you pause recording or turn off the power. 2 Beeps 4 times If you insert an SD card with the write protection switch set to [LOCK] when a recording mode has been selected. Check the sentence displayed on the screen. (P98) ∫ [ POWER SAVE] ≥OFF ≥5 MINUTES [OFF]: The power saving function is not activated. [5 MINUTES]: When about 5 minutes passed without any operation, this unit automatically turns off to prevent the battery from running down. When you use this unit, turn it on again. ≥ In the following cases, the power may not turn off even when set [POWER SAVE]>[5 MINUTES]. - When connecting to the AC outlet (When using the AC adaptor) - When connecting the unit to a PC or printer via the USB cable ∫ [ INITIAL SET] ≥YES ≥NO When there is a menu that cannot be selected depending on a combination of functions, set to [YES] for changing the menu settings back to the initial shipping condition. ∫ [ DEMO DEMO MODE] ≥OFF ≥ON This item is used to start the unit demonstration. (Only when the mode dial is at the or position) ≥ If you set to [DEMO MODE]>[ON] without inserting an SD card, this unit is automatically set to the demonstration mode for introducing its functions. If any button is pressed or operated, the demonstration mode is canceled. If no operations take place for approx. 10 minutes, the demonstration mode automatically starts. To terminate the demonstration mode, insert an SD card, or set to [DEMO MODE]>[OFF]. For normal use, set this function to [OFF]. 95 VQT0X39