Panasonic SDRS150 SDRS150 User Guide - Page 73
PLAYBACK ON TV, the multi-connector terminal [MULTI]
UPC - 037988254460
View all Panasonic SDRS150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Playback on TV Images recorded by this unit can be played back on a TV. ¬ Insert an SD card with recordings into the unit. 1 [S-VIDEO IN] 1 [VIDEO IN] [AUDIO IN] MULTI Open the terminal cover and then connect the multi cable (supplied) to the multi-connector terminal [MULTI] and the TV. 1 Multi cable (supplied) Insert the plugs as far as they will go. ≥ If the TV has an S-Video terminal, then also connect an S-Video plug. It allows you to enjoy more beautiful images. (You must also connect the Video/Audio input terminals.) ≥ Use the AC adaptor to free you from worrying about the battery running down. 2 Turn on this unit, then set the mode to [ ] or [ ]. 3 Change the input channel on the TV. Example: Set the channel to "VCR2" etc. (The channel set will differ depending on the terminal to which the cable is connected.) 4 Start playback on this unit. (P60, 63) The image and audio are output on the TV. ∫ If the image or audio from this unit is not output on the TV ≥ Check that the plugs are inserted as far as they go. ≥ Check the connected terminal. ≥ You may not be able to playback motion pictures recorded to SD card on this unit by inserting the SD card into a TV with a built-in SD card slot. ≥ Check the TV's input setting (input switch). (For more information, please read the operating instructions for the TV.) 73 VQT0X39