Pfaff creative 7550 Owner's Manual - Page 155
additional
View all Pfaff creative 7550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Bias tape binder Binding with bias tape is a very easy method of giving fabric edges a smooth and neat appear ance. For this you need unfolded bias tape about 24 mm (one inch) wide. • Remove the foot holder with sewing foot and screw on the binder. • Cut the beginning of the bias tape at a diago nal. • Push the tape into the scroll of the binder and pull it out to the back. • Adjust the binder so that the needle enters at about 1-1.5mm (1/16") from the folded-in edge of the bias tape, or adjust the needle po sition. • Stitch a few centimetres (about an inch) along the bias tape. • Insert the edge to be bound into the slot of the binder. The raw edge must be placed between the bias tape edges. During sewing, the bias tape will enclose the raw edge automatically. TIP: You can obtain an additional effect by using zigzag stitches or fancy stitches. Program: 00 Stitch length: 2.5 Tension: 3-5 U) Cu H H I