Pfaff creative vision Owner's Manual - Page 11

Presser feet Presser foot 0A Presser foot 1A Presser foot 2A Presser foot 3 Presser foot 4 Standard presser foot with IDT (attached on the machine upon delivery) This foot is used mainly for straight stitching and zigzag stitching with a stitch length longer than 1.0mm. Fancy stitch foot with IDT This foot is used for decorative stitches. The groove on the underside of the foot is designed to flow smoothly over the stitches. Fancy stitch foot When sewing decorative stitches or short zigzag stitches and other utility stitches with less than 1.0mm stitch length, use this foot. The groove on the underside of the foot is designed to flow smoothly over the stitches. Blindhem foot with IDT This foot is used for blindhem stitches. The toe on the foot guides the fabric. The red guide on the foot is designed to ride along the fold of the hem edge. Zipper foot with IDT This foot can be snapped on either the right or the left of the needle, making it easy to sew close to both sides of the zipper teeth. Move needle position to right or left to sew closer to zipper teeth. Introduction Presser foot 5A Sensormatic buttonhole foot When connected to the machine, the buttonhole is sewn in a suitable length to the button size that has been entered into the machine. Presser foot 5M Presser foot 6A Presser foot 7 Presser foot 8 Manual buttonhole foot This foot is used for sewing manual buttonholes. Use the markings on the foot to position the garment edge. The finger on the back of the foot holds cording for corded buttonhole. Embroidery/Sensormatic free-motion foot This foot is used for embroidery and free-motion sewing. This foot can also be used for darning. Rolled hem foot with IDT, 3mm This foot is used to sew narrow hems in light to medium weight fabric. Maxi-stitch foot This foot is used for side-motion stitches. Important: Make sure that the IDT is disengaged when using presser foot 2A, 5A, 5M, 6A and 8. 1:11