Pfaff creative vision Owner's Manual - Page 45
Pfaff HD screen - 5 0 features
View all Pfaff creative vision manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
AutoSave current state When AutoSave current state is selected, the machine will save current state periodically while embroidering and also when you stop embroidering. The information about the embroidery will be saved even after switching the machine off. Note: If AutoSave current state is selected it can take longer to go from Embroidery edit to Embroidery stitch-out. Timer Displays the total sewing and embroidery time of your machine. Touch the icon to reset the timer. Cut jump stitches Your machine features the automatic function Cut jump stitches. This function saves you time trimming after the embroidery is completed. When Cut jump stitches is selected your machine will trim the top jump stitch thread and pull the thread end to the underside of the fabric as you embroider. Note: Your machine will also cut the thread after you have changed to a new color. Hold the thread end when you start embroidering again, so that you can easily remove the thread end when cut. Designs marked with this symbol are programmed for Cut jump stitches. Jump stitch trim commands can be added to any design using the 4D™ Organizer Software, included with your machine. Automatic thread snips When selected, the automatic thread snips is activated. The threads are cut automatically and the presser foot raises at color changes or when an embroidery is finished. When deselected, no automatic thread snips will be performed. Automatic presser foot lift When selected, the automatic presser foot lift is activated. The presser foot will raise to pivot height for example when stopping with the needle in the down position. When deselected, the presser foot will stay lowered even if the machine stops with the needle in down position. Defragment machine memory To optimize the sewing and embroidery performance you sometimes need to do a defragmentation. When that needs to be done a pop-up message appears. To defragment your machine first remove unneccesary files then go to the Machine Settings in the Settings menu and select Defragment machine memory. The defragmentation can take up to 45 minutes. ABC 3:9 Pfaff HD screen