Ricoh Aficio MP 7500 S/P Copy/Document Server Reference - Page 212

Appendix • You cannot change stapling positions during copying. • When the original image is rotated, the staple orientation changes by 90°. • When [Top] or [Bottom] is selected and the paper with the same orientation as the original is not loaded, the image is rotated and the paper with the same size and the different orientation is selected. • With certain stapling settings, you cannot use the Rotate function. • If you select the Saddle Stitch function with the Booklet finisher, the machine staples and folds the paper in the center, then delivers the paper folded. • If you select the Saddle Stitch function in Magazine mode, the machine staples the paper, and folds it like a book, then delivers the paper folded. ❖ Punch • When using Punch and Combine, Double Copies, or Auto Reduce/En- large, the message "Blank part will appear. Check orientation." may ap- pear because of the orientation of the original and the copy paper. If this 5 occurs, change the orientation of the copy paper. • Punchable paper sizes are as follows: Punch Unit Type Position 2 holes type L K 3 holes type L K 4 holes type L K Paper Size A3 - A5, 11" × 17", 81/2" × 11" A4 - A5, 81/2" × 11" A3, B4 JIS, 11" × 17" A4, B5 JIS, 81/2" × 11" A3, B4 JIS, 11" × 17" A4, B5 JIS, 81/2" × 11" 194