Ricoh Aficio MP C3500 General Settings Guide - Page 124

Copier / Document Server Features Input/Output This section describes the user tools in the Input/Output menu under Copier / Document Server Features. Default settings are shown in bold type. ❖ Switch to Batch You can select to have Batch mode or SADF mode displayed when you press the [Special Original] key. 3 • Batch • SADF ❖ SADF Auto Reset In SADF mode, an original must be set within a specified time after the previous original has been fed. You can adjust this time from 3 to 99 seconds in increments of 1 second. The default setting is 5 second(s). ❖ Rotate Sort: Auto Paper Continue Specify to continue copying when paper of the required orientation has run out during rotate sort. • On Copying continues using copy paper of a different orientation. The copy job will finish even if you have left the machine. • Off When paper of the required orientation runs out, the machine stops copying and prompts you to supply copy paper. After you have loaded paper, the machine will continue copying. ❖ Memory Full Auto Scan Restart When memory becomes full while scanning originals, the machine can make copies of scanned originals first, and then automatically proceed scanning remaining originals. • On You can leave the machine unattended to make copies, but sorted pages will not be sequential. • Off When memory becomes full, the machine stops operation allowing you to remove the copy pages delivered on the output tray. ❖ Letterhead Setting If you select [Yes] in this function, the machine rotates the image correctly. • Yes • No Orientation-fixed (top to bottom) or two-sided paper might not be printed correctly depending on how the originals and paper are placed. 116