Ricoh Aficio MP C3500 General Settings Guide - Page 74

System Settings IEEE 802.11b This section describes the user tools in the IEEE 802.11b menu under Interface Settings. [IEEE 802.11b] is displayed when this machine is installed with the wireless LAN interface board. 2 Be sure to make all settings simultaneously. ❖ Communication Mode Specifies the communication mode of the wireless LAN. • 802.11 Ad-hoc Mode • Ad-hoc Mode • Infrastructure Mode ❖ SSID Setting Specifies SSID to distinguish the access point in infrastructure mode or 802.11 ad hoc mode. The characters that can be used are ASCII 0x20-0x7e (32 bytes). If blank is specified in 802.11b ad hoc mode or ad hoc mode, "ASSID" appears. ❖ Channel Specifies a channel when you select 802.11b ad hoc mode or ad hoc mode. The default setting is 11. The following channels are available: • Metric version: 1-14 • Inch version: 1-11 ❖ Security Method Specifies the encryption of the IEEE 802.11b (wireless LAN). If you select [WEP], always enter WEP key. If you select [WPA], the encryption and authentication methods. Specify "WPA", when [Communication Mode] is set to [Infrastructure Mode]. • Off • WEP • WPA • WPA Encryption Method Select either "TKIP" or "CCMP(AES)". • WPA Authent. Method Select either "WPA-PSK" or "WPA802.1X)". If you have selected "WPAPSK", enter the pre-shared key (PSK) of 8- 63 characters in ASCII code. ❖ Wireless LAN Signal When using in infrastructure mode, you can check the machine's radio wave status using the control panel. Radio wave status is displayed when you press [Wireless LAN Signal]. 66