Ricoh Aficio MP C3500 General Settings Guide - Page 71

Interface Settings ❖ Host Name Specify the host name. Enter the host name using up to 63 characters. ❖ Machine Name Specify the machine name. Enter the machine name using up to 31 characters. 2 Parallel Interface This section describes the user tools in the Parallel Interface menu under Interface Settings. [Parallel Interface] is displayed when this machine is installed with the IEEE 1284 interface board. ❖ Parallel Timing Sets the timing for the control signal of the parallel interface. • ACK Outside • ACK Inside • STB Down ❖ Parallel Communication Speed Sets the communication speed for the parallel interface. • High Speed • Standard ❖ Selection Signal Status Sets the level for the select signal of the parallel interface. • High • Low ❖ Input Prime Sets whether to validate or invalidate the input prime signal upon reception. • Active • Inactive ❖ Bidirectional Communication Sets the printer's response mode to a status acquisition request when using a parallel interface. • On • Off When set to [Off], the bidirectional communication function will be disabled, and the printer driver will not be installed under Windows Auto Detect function. 63