Ricoh Aficio MP C3500 General Settings Guide - Page 21

❖ When using in adhoc mode / 802.11 ad hoc mode Connecting to the Interfaces 1 1 2 ZGDH600J 1. If the IEEE 802.11b interface unit is functioning, the LED lights up in orange. 2. If it is connected properly to the network, the LED is green when in ad hoc mode or 802.11 ad hoc mode. If the LED is blinking, the machine is searching for devices. The LED will light after a few seconds. Print the configuration page to verify settings. Note ❒ For more information about printing a configuration page, see "Print List". Reference p.186 "Printing the configuration page" Checking the Signal When using in infrastructure mode, you can check the machine's radio wave status using the control panel. A Press [System Settings]. B Press [Interface Settings]. C Press [IEEE 802.11b]. D Press [Wireless LAN Signal]. The machine's radio wave status appears. E After checking radio wave status, press [Exit]. F Press the {User Tools/Counter} key to return to the User Tools / Counter / Inquiry menu. Note ❒ To check the radio wave status, press [IEEE 802.11b] under [LAN Type] in Net- work menu of Interface Settings. Reference p.36 "Using Utilities to Make Network Settings" p.66 "IEEE 802.11b" 13