Samsung MultiXpress SCX-8238 User Guide - Page 61

Using special copy features On the Advanced or Image tab of the Copy screen, you can select specific copy features. Selecting the size of originals Copies can be produced after specifying the document scanning size if the document size cannot be detected automatically or if you wish to specify a certain document size. 1. Press Copy from the display screen. 2. Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 35). 3. Adjust the settings for each copy such as Paper Supply, Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the settings for each copy" on page 54). 4. Press Advanced tab > Original Size from the display screen. 5. Select the original size. You can change the paper list on the display screen pressing Inch Size or mm Size. The paper list is divided into the available A/B size type and letter size type paper in this machine. • Custom: If there is no required size paper or you need to use custom sized paper, press the cardinal point arrows to set the original size. You can also set and save the custom size using Custom Size. You can select the custom size whenever you need it. In the DADF On the scanner glass Minimum size 128 x 128 mm (5 x 5 inches) 25 x 25 mm (1.0 x 1.0 inches) Maximum size 297 x 432 mm 297 x 432 mm (11.7 x 17.0 inches) (11.7 x 17.0 inches) • Auto: Automatically detects the size of originals, but this option is supported only when originals are Letter, Ledger, Legal, Statement, A3, A4, A5, B4, or JIS B5-sized. • Mixed Size: Allows the use of both of Letter and Legal-sized papers together, and the machine uses the proper-sized paper from several trays. For example, if the originals total 3 pages, the 1st page is letter-sized paper, the 2nd page is legal-sized paper, and the 3rd page is letter-sized paper, then the machine prints the output first letter, legal, and letter in order from several trays. Mixed Size is activated when the originals are placed in the DADF. • Other preset values: You can select the size of original directly by pressing the buttons. 6. Press OK from the display screen. 7. Press Start on the control panel to begin copying. Selecting the orientation of originals When copying double-sided documents or making double-sided copies or combined copies, specify the document orientation; otherwise, the copies may not be printed in the correct page order or correct front and back page arrangement. The custom size is different depending on where the originals are placed. 1. Press Copy from the display screen. 2. Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 35). 3. Adjust the settings for each copy such as Paper Supply, Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the settings for each copy" on page 54). 4. Press Advanced tab > Original Orientation from the display screen. 5. Select the orientation of the original document. • Upright Images: Select this setting for an original document loaded with the top toward the back of the machine. Copying_ 61