Samsung MultiXpress SCX-8238 User Guide - Page 70
Cover copying, Transparency copying, Sided Printed Sheet
View all Samsung MultiXpress SCX-8238 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Cover copying The machine automatically adds covers to your copied set using stock taken from a different tray. Covers must be the same size and orientation as the main body of the job. You cannot use this feature while using Booklet (see "Booklet copying" on page 68). Transparency copying This feature prevents copies to print onto transparencies from sticking together as a cause by heat that is produced during copying. You can also copy originals to the separator sheets. 1. Press Copy from the display screen. 2. Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 35). 3. Select the tray, other than Auto, that has the cover paper loaded in the Basic tab. • If you select Auto, the Covers feature remains inactive. • You have to select a tray that has paper of the same size and orientation as the originals. 4. Adjust the settings for each copy such as Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the settings for each copy" on page 54). 5. Press the Advanced tab > Covers from the display screen. 6. Press the appropriate option. • Off: Disables this feature. • Front: Prints the document with the front cover. • Back: Prints the document with the back cover. • Front & Back: Prints the document with the front and back cover. 7. Press 1 Sided Printed Sheet in Cover Sheet to select if the cover will be 1-sided, 2-sided, or blank paper. 8. Select a tray in Paper Source. 9. Press OK from the display screen. 10. Press Start on the control panel to begin copying. 1. Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 35). 2. Load the right-sized transparencies with the side to be printed facing down on the multi-purpose tray. 3. Press Machine Setup > Tray Settings > Settings > MP Tray > Paper type > Transparency > OK from the display screen. 4. Press ( ) and Copy from the display screen. 5. Press the Advanced tab > Transparency from the display screen. 6. Press the appropriate option. • No Transparency: Does not place separator sheets between transparencies. • Blank Separators: Places a blank sheet between transparencies. Select a tray which loaded paper for separating from Separator. • Printed Separator: Places the same image on the separator sheets as printed on the transparency. Select a tray which loaded paper for separating from Separator. 7. Press OK from the display screen. If you did not select Transparency in step 3, a pop-up window appears. 8. Press Start on the control panel to begin copying. Copying_ 70