Samsung MultiXpress SCX-8238 User Guide - Page 63

7. Turn the original over and place it on the scanner glass as shown below, and then close the DADF. When you place a original on the scanner glass, leave a little space between the edge of the scanner glass and the original. Otherwise, the part of original could not be printed. the Reduce/Enlarge feature. 8. Press Start on the control panel to begin copying. 1. Press Copy from the display screen. 2. Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 35). 3. Press Advanced tab > N-Up from the display screen. 4. Press an option according to how many images to copy onto one page. • Off: Copies an original onto one sheet of paper. • 2Up ~ 32Up: Copies corresponding numbers of separate originals to one page. Depending on original document size, output paper size, and the reduced rate of image, some options may be inactivated. 5. Select a tray in Paper source. 6. Press the appropriate page order. • Depending on the options you select the result will vary. Refer to the below table before using the 2Up option. • If the original is larger than the printable area, some portions may not be printed. • If you do not press the Start button, only the front side will be copied. • If you press the Stop button, the machine cancels the copy job and returns to ready mode. N-up copying The machine reduces the size of the original images and prints 2 - 32 pages onto one sheet of paper. • When you use this option, ID Copy, Image Repeat, Booklet, Book Copy and Poster Copy in the Advanced tab are inactivated. • When you use this option, Auto Fit is the only available option for Copying_ 63