Samsung NX1000 User Manual - Page 161
for RAW files, Auto Focus does
View all Samsung NX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Appendix > Before contacting a service center Situation Photos are distorted Playback screen does not appear on the connected external device Your computer does not recognize your camera Your computer disconnects the camera while transferring files Your computer cannot play videos Intelli-studio is not functioning properly Suggested remedies This camera can have minute distortion when using a wide-angle lens that enables shooting with a wide angle of view. This is normal, and does not cause malfunction. • Ensure that HDMI cable is properly connected to the external monitor. • Ensure that the memory card is properly recorded. • Ensure that the USB cable is connected correctly. • Ensure that your camera is switched on. • Ensure that you are using a supported operating system. The file transfer may be interrupted by static electricity. Disconnect the USB cable and connect it again. Depending on the software you use, video files may not play. To play video files captured with your camera, install and use the Intelli-studio program on your computer. (p. 141) • End Intelli-studio and restart the program. • You cannot use Intelli-studio on Macintosh computers. Situation Cannot set the DPOF for RAW files Auto Focus does not work AEL feature does not work Lens does not work External flash or GPS does not work The date & time settings screen appears when you power on the camera Suggested remedies You cannot set the DPOF for RAW files. • Subject is not in focus. When the subject is outside the AF area, shoot by moving the subject inside the AF area and half pressing [Shutter]. • Subject is too close. Step back from the subject and shoot. • The focus mode is set to MF. Switch the mode to AF. AEL feature does not work in t, M, i, g and s modes. Select another mode to use this feature. • Ensure that the lens is properly mounted. • Remove the lens from the camera and re-mount it. Ensure that the external device is properly mounted and turned on. • Set the date and time again. • This screen appears when the camera's internal power source is completely discharged. Insert a fully charged battery and wait at least 72 hours in power off status for the internal power source to be recharged. 160