Schwinn 510e Elliptical Service Manual - Page 21

Owner's Manual.

Get Schwinn 510e Elliptical PDF manuals and user guides View all Schwinn 510e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

12. Remove the cardboard and tape from the Brake Assembly and Flywheel. Verify that the Brake Magnet Arm can move freely and that the Brake Magnet and Flywheel do not touch. 13. Before fully attaching the Shrouds, power up the machine to verify that the Magnet Arm can move freely, and that the Brake Magnet and Flywheel do not touch at the maximum resistance level. ! Machine is on. Current is active. There is risk of electrical shock. Be sure to keep fingers clear of all pinch hazards when you change the resistance level. 14. Unplug the AC Adapter from the wall outlet and machine. 15. Re-assemble the machine in the reverse order of when the parts were removed. 16. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. Brake Magnet Arm Flywheel 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
21
12. Remove the cardboard and tape from the Brake Assembly and
Flywheel. Verify that the Brake Magnet Arm can move freely and that the
Brake Magnet and Flywheel do not touch.
13. Before fully attaching the Shrouds, power up the machine to verify
that the Magnet Arm can move freely, and that the Brake Magnet and
Flywheel do not touch at the maximum resistance level.
!
Machine is on. Current is active. There is risk of electrical
shock. Be sure to keep fingers clear of all pinch hazards
when you change the resistance level.
14. Unplug the AC Adapter from the wall outlet and machine.
15. Re-assemble the machine in the reverse order of when the parts
were removed.
16. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
Flywheel
Brake Magnet
Arm