Schwinn 510e Elliptical Service Manual - Page 56
upright. Do not do steps that involve
View all Schwinn 510e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
A second person is recommended to stabilize the Frame Assembly. 9. Using a 6mm hex wrench, remove the indicated hardware from the Frame Assembly. Be prepared to support the Frame Assembly before removing the hardware. The Frame Assembly may be awkward when released from the Rail Assembly. Some components of the machine can be heavy or awkward. Use a second person to hold the Frame Assembly stable and upright. Do not do steps that involve heavy lifting or awkward movements on your own. 10. With the assistance of a second person, carefully lift the Frame Assembly from the old Rail Assembly and place onto the new Rail Assembly. Be sure not to allow your fingers or hands to be pinched, or damage to be caused to the floor. 6mm X2 6mm X2 11. Re-assemble the machine in the reverse order of when the parts were removed. 12. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 56