Schwinn 510e Elliptical Service Manual - Page 49
are properly assembled.
View all Schwinn 510e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
7. Remove the old Leg and/or Pedal Arm and replace with the new Leg and/or Pedal Arm. 8. Re-assemble the machine in the reverse order of when the parts were removed. 9. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 49
49
7. Remove the old Leg and/or Pedal Arm and replace with the new Leg
and/or Pedal Arm.
8. Re-assemble the machine in the reverse order of when the parts were
removed.
9. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.