Schwinn 510e Elliptical Service Manual - Page 77
Rail Assembly.
 |
View all Schwinn 510e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
1. Unplug the AC Adapter from the wall outlet and machine. 2. Using a 13mm open faced wrench and a 6mm hex wrench, remove the hardware (indicated by arrows) that secures the Transport Wheel to the Rail Assembly. 3. Remove the old Transport Wheel and replace with the new Transport Wheel. Transport Wheel Rail Assembly 4. Re-assemble the machine in the reverse order of when the parts were removed. 5. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 77
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72 -
73 -
74 -
75 -
76 -
77
 |
 |
77
1. Unplug the AC Adapter from the wall outlet and machine.
2. Using a 13mm open faced wrench and a 6mm hex wrench, remove the
hardware (indicated by arrows) that secures the Transport Wheel to the
Rail Assembly.
3. Remove the old Transport Wheel and replace with the new Transport
Wheel.
4. Re-assemble the machine in the reverse order of when the parts were
removed.
5. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
Transport Wheel
Rail Assembly