Schwinn 510e Elliptical Service Manual - Page 52

Inlet Assembly on the Left Upper Engine Shroud.

Get Schwinn 510e Elliptical PDF manuals and user guides View all Schwinn 510e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

4. Using a #2 Phillips screwdriver, remove the indicated screws (by ovals) from the Left Upper Engine Shroud. Note: T he Power Inlet is attached to the inside of the Left Upper Engine Shroud. Do not crimp the Power Inlet Cable. Left Upper Engine Shroud Power Inlet 5. Using a 14mm wrench, loosen and remove the thin Nut from the Power Inlet Assembly on the Left Upper Engine Shroud. Note: Do not crimp the Cable. 6. Remove the old Power Inlet Assembly, and replace with the new Power Inlet Assembly. Note: Do not crimp the Cables. 7. Re-assemble the machine in the reverse order of when the parts were removed. 8. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. Power Inlet 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
52
4. Using a #2 Phillips screwdriver, remove the indicated screws (by ovals)
from the Left Upper Engine Shroud.
Note:
The Power Inlet is attached to the inside of the Left Upper Engine
Shroud. Do not crimp the Power Inlet Cable.
5. Using a 14mm wrench, loosen and remove the thin Nut from the Power
Inlet Assembly on the Left Upper Engine Shroud.
Note:
Do not crimp the Cable.
6. Remove the old Power Inlet Assembly, and replace with the new
Power Inlet Assembly.
Note:
Do not crimp the Cables.
7. Re-assemble the machine in the reverse order of when the parts were
removed.
8. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
Power Inlet
Left Upper Engine
Shroud
Power Inlet