Schwinn 510e Elliptical Service Manual - Page 39

Carefully slide the Left Leg / Pedal Assembly off of the Crank Arm

Get Schwinn 510e Elliptical PDF manuals and user guides View all Schwinn 510e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

4. Using a #2 Phillips screwdriver, remove the indicated screws (by ovals) from the Left Upper Engine Shroud. Note: T he Power Inlet is attached to the inside of the Left Upper Engine Shroud. Do not crimp the Power Inlet Cable. 5. Remove the Left Upper Engine Shroud. 6. Using a #2 Phillips screwdriver, remove the 4 screws that attach each of the Lower Engine Shrouds, and remove them. Left Upper Engine Shroud Note: Though shown in the following images, the Shrouds have been removed from the Frame Assembly. 7. Using two 6mm hex wrenches, remove the hardware that connects the Left Pedal Arm to the Lower Handlebars (indicated by arrow). Be aware that the Handlebar Assembly will be loose and will pivot when the hardware is removed. Safely allow the Handlebar Assembly to pivot downward and come to rest. Be sure not to be in the path of the Handlebar Assembly. 8. Using a 6mm hex wrench, remove the indicated hardware (by oval) from the Left Leg and Crank Arm. 9. Carefully slide the Left Leg / Pedal Assembly off of the Crank Arm and place outside the work area. Power Inlet Lower Engine Shroud, Left Crank Arm Left Leg Lower Handlebar Left Pedal Arm 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
39
Left Upper Engine
Shroud
Power Inlet
Lower Engine Shroud,
Left
Left Pedal Arm
Left Leg
Lower
Handlebar
Crank Arm
4. Using a #2 Phillips screwdriver, remove the indicated screws (by
ovals) from the Left Upper Engine Shroud.
Note:
The Power Inlet is attached to the inside of the Left Upper Engine
Shroud. Do not crimp the Power Inlet Cable.
5. Remove the Left Upper Engine Shroud.
6. Using a #2 Phillips screwdriver, remove the 4 screws that attach each
of the Lower Engine Shrouds, and remove them.
Note:
Though shown in the following images, the Shrouds have been
removed from the Frame Assembly.
7. Using two 6mm hex wrenches, remove the hardware that connects the
Left Pedal Arm to the Lower Handlebars (indicated by arrow).
Be aware that the Handlebar Assembly will be loose and will
pivot when the hardware is removed. Safely allow the
Handlebar Assembly to pivot downward and come to rest. Be
sure not to be in the path of the Handlebar Assembly.
8. Using a 6mm hex wrench, remove the indicated hardware (by oval)
from the Left Leg and Crank Arm.
9. Carefully slide the Left Leg / Pedal Assembly off of the Crank Arm and
place outside the work area.