Schwinn 510e Elliptical Service Manual - Page 55
Remove the Leg and Pedal Arm Assembly from the Frame Assembly.
View all Schwinn 510e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
5. Using two 6mm hex wrenches, remove the indicated hardware (by arrows) that attaches the Handlebar Assemblies to the Frame Assembly and Pedal Arms. Be aware that the Handlebar Assembly will be loose and will pivot when the hardware is removed. Safely allow the Handlebar Assembly to pivot downward and come to rest. Be sure not to be in the path of the Handlebar Assembly. 6. Carefully remove the Handlebar Assemblies from the Frame Assembly and place outside the work area. 7. Using a 6mm hex wrench, remove the indicated hardware (by an oval) from the Leg and Crank Arm. 8. Remove the Leg and Pedal Arm Assembly from the Frame Assembly. Handlebar Assemblies Crank Arm Leg Pedal Arm 55
55
5. Using two 6mm hex wrenches, remove the indicated hardware (by
arrows) that attaches the Handlebar Assemblies to the Frame Assembly
and Pedal Arms.
Be aware that the Handlebar Assembly will be loose and will
pivot when the hardware is removed. Safely allow the Handle-
bar Assembly to pivot downward and come to rest. Be sure
not to be in the path of the Handlebar Assembly.
6. Carefully remove the Handlebar Assemblies from the Frame Assembly
and place outside the work area.
7. Using a 6mm hex wrench, remove the indicated hardware (by an oval)
from the Leg and Crank Arm.
8. Remove the Leg and Pedal Arm Assembly from the Frame Assembly.
Pedal Arm
Handlebar
Assemblies
Leg
Crank Arm