Schwinn 510e Elliptical Service Manual - Page 45
attached to the Console.
 |
View all Schwinn 510e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
10. Using a #2 Phillips screwdriver, remove the four screws (indicated by arrows) that attach the Console to the Console Mast. 11. Slightly lift the Console from the Console Mast and disconnect the Cables from the back of the Console. Note: Do not crimp the Cables. Console Console 12. Tie a piece of string or wire to the end of the old I/O Cable where it attached to the Console. 13. Slightly lift the Console Mast from the Frame Assembly and disconnect the Cables. Fully remove the Console Mast with the Cables. Note: Do not crimp the Cables. Do not allow the Cables to be pulled into the Console Mast. Heart Rate and I/O Cables Console Mast 45
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40 -
41 -
42 -
43 -
44 -
45 -
46 -
47 -
48 -
49 -
50 -
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
 |
 |
45
Heart Rate and
I/O Cables
Console Mast
Console
Console
10. Using a #2 Phillips screwdriver, remove the four screws (indicated by
arrows) that attach the Console to the Console Mast.
11. Slightly lift the Console from the Console Mast and disconnect the
Cables from the back of the Console.
Note:
Do not crimp the Cables.
12. Tie a piece of string or wire to the end of the old I/O Cable where it
attached to the Console.
13. Slightly lift the Console Mast from the Frame Assembly and discon-
nect the Cables. Fully remove the Console Mast with the Cables.
Note:
Do not crimp the Cables. Do not allow the Cables to be pulled into
the Console Mast.