Schwinn 510e Elliptical Service Manual - Page 51
Using a #2 Phillips screwdriver, remove the indicated screws by ovals
View all Schwinn 510e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
1. Unplug the AC Adapter from the wall outlet and machine. 2. Using a standard screwdriver on the small slots along the edge of the Center Engine Shroud, gently pop it off from the Frame Assembly. Center Engine Shroud 3. Using a #2 Phillips screwdriver, remove the indicated screws (by ovals) from the Right Upper Engine Shroud. Note: To assist with re-assembly, the double oval is a self-tapping screw. Right Upper Engine Shroud Lower Engine Shroud, Right 51
51
1. Unplug the AC Adapter from the wall outlet and machine.
2. Using a standard screwdriver on the small slots along the edge of the
Center Engine Shroud, gently pop it off from the Frame Assembly.
3. Using a #2 Phillips screwdriver, remove the indicated screws (by ovals)
from the Right Upper Engine Shroud.
Note:
To assist with re-assembly, the double oval is a self-tapping screw.
Right Upper Engine
Shroud
Lower Engine Shroud,
Right
Center Engine
Shroud