Seagate Personal Storage 5000DV Installation Guide (Windows) - Page 20
Initialize, Erase, Volume Format, Install Mac OS 9 Drivers., Partition
View all Seagate Personal Storage 5000DV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
To format the drive for Mac OS X 1. Plug your drive into the Macintosh using either the FireWire or USB interface. 2. An alert box appears saying the new drive is 2 unreadable and asks you to initialize the drive. 3. Click Initialize. If you see another message, click OK. The Disk Utility menu appears. 4. Select your new drive from the list on the left. Make sure you select your new drive. This utility will erase all data on a drive. A description of the drive appears in the window. 16 Installing the Drive 5. Select the Erase tab at the top of the window. 6. Select Mac OS Extended from the Volume Format drop-down list. 7. Enter a name for your drive in the Name field. 8. Select the check box next to Install Mac OS 9 Drivers. This will allow your disk to be recognized if you start your system in Mac OS 9. 9. Click Erase to continue. An alert dialog appears to confirm the Erase process. 10. Click Erase to start the formatting process. After a few minutes, your drive will be formatted with the Mac OS Extended format. You can now begin using your new drive. If you wish to partition the drive into two or more volumes, you can select the Partition tab in the Disk Utility program and follow the instructions.