Sharp MX-B350P MX-B350P MX-B450P User Manual - Page 116
Change Admin PIN, Initial Setting, Printer, Network, Date & Time Set, Daylight Saving Time
View all Sharp MX-B350P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
SYSTEM SETTINGS►SYSTEM SETTINGS SYSTEM SETTINGS Change Admin PIN Use this function to change administrator PIN code. To change the administrator PIN code, see "PROGRAMMING AN ADMINISTRATOR PIN CODE (page 4-2)". Initial Setting The default settings for operation of the machine can be configured. Select the [Initial Setting] to configure the settings. Date & Time Set Use this to set the date and time in the machine's built-in clock. Daylight Saving Time Enable daylight saving time. Printer Settings related to the printer function can be configured. Select the [Printer] to configure the settings. Notice Page Set whether a notice page is printed when printing does not take place due to an error such as memory full. Network Network settings are described below. Select the [Network] key to configure the settings. Confirmation of Network Confirm network settings. Connection Type You can change the machine's network connection type. Wired settings IPv4 Settings When using the machine on a TCP/IP (IPv4) network, use this setting to configure the IP address of the machine. The settings are shown below. Enable DHCP Use this setting to have the IP address obtained automatically using DHCP (Dynamic Host Configuration Protocol). When this setting is enabled, it is not necessary to manually enter an IP address. IPv4 Address Enter the IP address of the machine. Subnetmask Entry the Subnetmask Default Gateway Enter the Default Gateway. IPv6 Settings When using the machine on a TCP/IP (IPv6) network, use this setting to configure the IP address of the machine. The settings are shown below. Enable IPv6 Protocol Enable this setting. Enable DHCPv6 Use this setting to have the IP address obtained automatically using DHCP (Dynamic Host Configuration Protocol). When this setting is enabled, it is not necessary to manually enter an IP address. Manual Address Enter the IP address of the machine. Prefix Length Enter the prefix length (0 to 128). Default Gateway Enter the IP Gateway address. • If DHCP is used, the IP address assigned to the machine may change automatically. If the IP address changes, printing will not be possible. • In an IPv6 environment, the machine can use LPD protocol. 4-8