Sharp MX-B350P MX-B350P MX-B450P User Manual - Page 21

BEFORE USING THE MACHINE►LOADING PAPER Setting orientation of the print side The setting orientation varies for the print side of paper, depending on the tray used. For "Letter Head" and "Pre-Printed", set the paper in the reverse orientation. Place with the print side facing the direction indicated below. Tray In normal status With letter head or pre-printed paper set Trays 1 - 2 Facing up Facing down Bypass Facing down Facing up Paper that cannot be used • Embossed paper • Tab paper • Special media for an ink jet printer (fine paper, glossy paper, glossy film, etc.) • Carbon paper or thermal paper • Pasted paper • Paper with clips • Paper with fold marks • Torn paper • Oil-feed transparency film • Thin paper less than 15 lbs (55 g/m2) • Heavy paper as thick as 80lbs. cover (220 g/m2) over • Irregularly shaped paper • Stapled paper • Damp paper • Curled paper • Paper whose print side or reverse side has been already printed on by another printer or multifunction device. • Paper with a wave-like pattern due to moisture absorption • Paper with creases • Paper with dust Non-recommended paper • Iron-on transfer paper • Perforated paper 1-18