Sharp MX-B350P MX-B350P MX-B450P User Manual - Page 121
Energy Save, List Print
View all Sharp MX-B350P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
SYSTEM SETTINGS►SYSTEM SETTINGS Energy Save These settings are used to configure energy saving settings. To access one of these settings, select "Energy Save" in the mode selection screen, and select the desired setting in the energy save screen, and then press the [OK] key. Auto Power Shut-Off This setting is used to enable auto power shut-off mode, which automatically turns off the power to the fusing unit if the operation panel is not used for a certain duration of time. Enabling auto power shut-off mode helps conserve energy, preserve natural resources, and reduce environmental pollution. The function is initially enabled. Rather than disabling the auto power shut-off feature, it is recommended that you first try lengthening the time set in "Auto Power Shut-Off Timer" (see below). In most cases a suitable timer setting will allow work to proceed with minimal delay and still enable you to enjoy the benefits of power conservation. Auto Power Shut-Off Timer This setting is used to set the duration of time until auto power shut-off mode activates when the operation panel is not used. Using this function helps conserve energy, preserve natural resources, and reduce environmental pollution. The factory default setting is "1 min.". "1 min.", "3 min.", "5 min.", "10 min.", "15 min.", "30 min.", "45 min.", "60 min.", "75 min.", "90 min.", "105 min." or "120 min." can be selected for the duration of time. Select a setting that suits your work conditions. Preheat Mode This setting is used to set the duration of time until preheat mode, which automatically lowers the fusing unit temperature, activates when the operation panel is not used. Using this function helps conserve energy, preserve natural resources, and reduce environmental pollution. The factory default setting is "1 min.". "1 min.", "3 min.", "5 min.", "10 min.", "15 min.", "30 min.", "45 min.", "60 min.", "75 min.", "90 min.", "105 min." or "120 min." can be selected for the duration of time. Select a setting that suits your work conditions. Enter Auto Power Shut-Off after the Remote Job When the machine completes a print job received from the PC, the machine immediately returns to the Auto Power Shut-Off mode. Toner Save Mode You can reduce the amount of toner used for printing. Toner Save Mode is only effective when the machine's printer driver is not used. When the printer driver is used, the printer driver setting takes precedence. This function may not operate in some applications and operating systems. List Print This is used to print lists and reports that are only for use by the administrator of the machine. Select the [List Print], and then select the list to print. User Info. Print The user name, user number, paper used, paper limits, and function permission settings can be printed for each user. 4-13