Sharp UP-600 UP-600 Operation Manual - Page 116
Direct Key Programming, Direct PLU/COMBO/Dept. key
View all Sharp UP-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Direct Key Programming Use the following procedure to select direct-key programming: Direct PLU/COMBO/Dept. key You can assign PLUs, combo meals and departments directly to the keyboard. In the case of combo meals or PLUs, you may assign up to 10-levels to be accessed directly on the keyboard. In the case of setting "00001 DIRECT PLU" 1. In the SETTING window, select "02 DIRECT KEY." • The DIRECT KEY window will appear. Select the desired key no. from the key numbers list (Refer to the next page). • TYPE (Use the selective entry) PLU: Assigns the key as a direct PLU key. COMBO: Assigns the key as a direct combo key. DEPT: Assigns the key as a direct department key. NOTE • You can also select a direct PLU key by pressing the corresponding key when the PLU has been assigned directly on the keyboard instead of selecting the key from the menu. • When selecting a department, the screen on which a department code is to be entered (the message "DEPT. CODE") will appear. • When selecting a combo, the screen on which a combo table number is to be entered ("COMBO TBL#") will appear. • LEVEL1 thru 5 (Use the numeric entry) Enter a PLU number or combo table number for each level. For example, if you want to use this key as PLU code 1 (level 1) and PLU code 101 (level 2), enter 1 for the "LEVEL1" and 101 for the "LEVEL2." 114