Sharp UP-600 UP-600 Operation Manual - Page 63
Validation slip specification, Server Arrival/Departure Time Printing
View all Sharp UP-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
s Validation slip specification Make validation slips according to the following specification. The use of any slips other than specified causes the printer to malfunction. • Type of paper: plain paper • Paper thickness: 0.0028 to 0.0055 in. (0.07 to 0.14 mm) thick • Paper width: over 5.12 in. (130 mm) • Print position 0.87 in. (22 mm) 3.43 in. (87 mm) over 5.12 in. (130 mm) 0.79 in. (20 mm) over 2.76 in. (70 mm) Server Arrival/Departure Time Printing Your POS terminal allows the server to print the employee arrival and departure times, etc. using the validation printing function. 1. Turn the mode switch to the REG position. 2. Put a card into the paper chute and perform the following key operation. • Arrival time (printed on the receipt) Numeric key 1 → PRINT • Departure time (printed on the journal) Numeric key 2 → PRINT 3. Sample printout Arrival time Server code (on the receipt) Departure time (on the journal) 61