Sharp UP-600 UP-600 Operation Manual - Page 159

Machine number When your store has two or more POS terminals, it is practical to assign them unique machine numbers for their identification. Program the item as follows: • MACHINE# (Use the numeric entry) Machine number (max. 6 digits: 0 to 999999) Consecutive number The consecutive number is increased by one each time a receipt is issued. Program the item as follows: • CONSECUTIVE# (Use the numeric entry) Enter a number (max. 4 digits: 0 to 9999) that is one less than the desired starting number. Interval timer You can program the timer for THE TILL TIMERTM and the screen save mode timer. Program each item as follows: • TILL TIMER (Use the numeric entry) The POS terminal counts the number of times the drawer is left open for longer than a programmed time limit. The counter will be incremented by one each time a programmed time limit is reached. The time limit for THE TILL TIMERTM can be preset for 0 to 255 seconds. The count is printed on the transaction report and server report. If the number "0" is entered, this function is unavailable. • SCREEN SAVE (Use the numeric entry) Screen save mode timer (max. 2 digits: 0 to 99 minutes) If the number "0" is entered, the POS terminal will turn the display off after 100 min., if the POS terminal remains idle. 157