Sharp UP-600 UP-600 Operation Manual - Page 20

4 Prior to Entries REG MODE Preparations for Entries Receipt and journal paper rolls If the receipt and journal paper rolls are not set in the machine or the existing rolls are low in supply, install new ones according to section "Installing and Removing the Paper Roll" under "Operator Maintenance." Receipt ON/OFF function You can disable receipt printing in the REG mode to save paper using the receipt function. To disable receipt printing, press the MISC FUNC key and select RCP S.W. from the menu and turn the receipt OFF by press the • key. When the function is in the OFF status, the receipt off indicator "R" is highlighted. NOTE Your register will print reports regardless of the receipt state. This means that the receipt roll should be installed even when the receipt state is "OFF". Error Warning In the following examples, your POS terminal will go into an error state accompanied with a warning beep and the error message on the display. Clear the error state by pressing the CL key and take the proper action to remedy the problem. • When you exceed a 32-digit number (entry limit overflow): Cancel the entry and re-enter a correct number. • When you make an error in key operation: Clear the error and try the entry again. • When you make an entry beyond a programmed amount entry limit: Check to see if the entered amount is correct. If it is correct, it may be possible to enter it in the MGR mode. Please contact your manager. • When an including-tax subtotal exceeds eight digits: Clear the error display by pressing the CL key and press a media key to finalize the transaction. Sample Receipt The print format will vary depending on the printer you use. Date Machine no. Consecutive no. Item entry Time Server name/server code Sales total Cash amount tendered Change due 18