Sony CCD-TRV138 Camera Operations Guide - Page 13

Getting started, After charging the battery, To remove the battery pack

Page 13 highlights

6 Slide the POWER switch up to (CHG) OFF. The CHG (charge) lamp lights up and charging starts. To check the remaining battery - Battery Info DISPLAY/BATT INFO Getting started After charging the battery The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack. To remove the battery pack BATT (battery) release button POWER switch OPEN POWER switch You can check the battery's current charge level and its current remaining recording time both during charging or when the power is turned off. 1 Set the POWER switch to (CHG) OFF. 2 Press OPEN and open the LCD panel. 3 Press DISPLAY/BATT INFO. The battery information appears for about 7 seconds. Keep the button pressed to view it for about 20 seconds. 1 Lift up the viewfinder. 2 Set the POWER switch to (CHG) OFF. 3 Slide the battery pack out in the direction of the arrow while pressing the BATT (battery) release button down. b Note • If you do not use the battery pack for a long time, use up the battery pack completely before storing it. See page 96 about storage of the battery pack. BATTERY INFO BATTERY CHARGE LEVEL 0% 50% 100% REC TIME AVAILABLE LCD SCREEN: 81 min VIEWFINDER: 112 min A Battery charge level: Displays approximate remaining amount of power left in the battery pack. B Approximate possible recording time using the LCD panel. C Approximate possible recording time using the viewfinder. Charging time Approximate number of minutes required when you fully charge a fully discharged battery pack ,continued Getting started 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

Getting started
Getting started
13
6
Slide the POWER switch up to (CHG)
OFF.
The CHG (charge) lamp lights up and
charging starts.
After charging the battery
The CHG (charge) lamp turns off when the
battery is fully charged. Disconnect the AC
Adaptor from the DC IN jack.
To remove the battery pack
1
Lift up the viewfinder.
2
Set the POWER switch to (CHG) OFF.
3
Slide the battery pack out in the direction
of the arrow while pressing the BATT
(battery) release button down.
b
Note
If you do not use the battery pack for a long time, use
up the battery pack completely before storing it. See
page 96 about storage of the battery pack.
To check the remaining battery – Battery
Info
You can check the battery's current charge level
and its current remaining recording time both
during charging or when the power is turned off.
1
Set the POWER switch to (CHG) OFF.
2
Press OPEN and open the LCD panel.
3
Press DISPLAY/BATT INFO.
The battery information appears for about 7
seconds.
Keep the button pressed to view it for about
20 seconds.
A
Battery charge level: Displays
approximate remaining amount of
power left in the battery pack.
B
Approximate possible recording time
using the LCD panel.
C
Approximate possible recording time
using the viewfinder.
Charging time
Approximate number of minutes required when
you fully charge a fully discharged battery pack
BATT (battery)
release button
POWER switch
POWER switch
OPEN
DISPLAY/BATT INFO
BATTERY
INFO
BATTERY
CHARGE
LEVEL
REC
TIME
AVAILABLE
0%
50%
100%
LCD
SCREEN:
81 min
VIEWFINDER: 112 min
,
continued