Sony HCD-FL7D Operating Instructions - Page 13
Inserting three R6 size AA, batteries into the remote
View all Sony HCD-FL7D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting Started Notes • Keep the speaker cords away from the antennas to prevent noise. • Do not place the rear speakers on top of a TV. This may cause color distortion in the TV screen. • Be sure to connect both left and right rear speakers. Otherwise, the sound will not be heard. To prevent the speakers from falling When you place the speakers on top of the sub woofer and the main unit, do the following. 1 Place the speaker support on the sub woofer and the main unit. Tighten one of the screws (1) lightly to temporarily fix the speaker support, tighten the other screw to fix (2), then tighten the first screw (1) firmly. Tighten the screws while threading the top boards of the sub woofer and the main unit. Screw (2) Speaker support Screw (1) 2 Insert the speaker support in the slot of the front speakers. Tighten two screws while threading the rear boards of the front speakers. Screw Slot Note When carrying the system, do not lift the front speakers only. Inserting three R6 (size AA) batteries into the remote e Ee Ee E Operating a Sony TV You can use the following buttons on the remote to operate a Sony TV. To Turn the TV on or off Switch the TV's video input Change the TV channels Adjusts the volume of the TV speaker(s) Press TV ?/1. TV/VIDEO. TV CH +/-. TV VOL +/-. Tip When the remote no longer operates the system, replace all the batteries with new ones. Note If you do not use the remote for a long period of time, remove all the batteries to avoid possible damage from battery leakage. Notice for carrying this system Do the following to protect the DVD mechanism. 1 Turn on the system, then press DVD. Make sure that all discs are removed from the unit. 2 Hold down DVD, then press ?/1 until "LOCK" appears. 3 Release ?/1 first, then release DVD. 4 Unplug the AC power cord. 13GB