Sony HCD-FL7D Operating Instructions - Page 53
To adjust the brightness, of the display, To listen to multi channel, sound
View all Sony HCD-FL7D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
ODitshpelraFy/eOatthuerresFeatures Other Features To adjust the brightness of the display Use the remote for the operation. 1 Press AMP MENU. 2 Press ENTER. 3 Press V or v repeatedly to select "DIMMER". 4 Press B or b repeatedly to select the setting you want. DIMMER 1 y DIMMER 2 y DIMMER 3 5 Press ENTER. To listen to multi channel sound Press 2.1CH/MULTI on the remote. Each time you press the button, the display changes as follows: 2.1CH t MULTI t AUTO 2.1CH: The sound is output in 2-channel stereo and the sub woofer. MULTI: The sound is output in multi channel. AUTO: Automatically switches between 2.1CH and MULTI according to the type of disc being played. 2.1CH: for CD, dts-CD, SACD, MP3 MULTI: for DVD, VCD Notes • When using headphones, this setting is fixed to "2.1CH". • When you select "AUTO" in DIGITAL function, the sound is output in 2.1 channel. To adjust the decoding format mode This operation lets you specify the decode type for the signal input to the digital audio jacks and DVD function. 1 Press AMP MENU. 2 Press V or v repeatedly to select "DECODE FORMAT". 3 Press ENTER. 4 Press B or b repeatedly to select the decode format mode. 5 Press ENTER. • "AUTO MODE" switches between DTS, Dolby Digital, or PCM decoding automatically. • "PCM MODE" decodes all the input signals as PCM signals. If Dolby Digital, DTS, or MPEG (etc.) signals are input, no sound will be heard. Set to "PCM MODE" if, when set to "AUTO MODE", sound from the digital audio jacks (for CD etc.) is interrupted when playback starts. 53GB