Sony HCD-FL7D Operating Instructions - Page 67
Specifications
View all Sony HCD-FL7D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Specifications AUDIO POWER SPECIFICATION: (DHC-FL7D USA model only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION with 8 ohm loads both channels driven, from 120 Hz - 10 kHz; rates 60 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output. Continuous RMS power output Center speaker: 60 watts (16 ohms at 1 kHz, 10% THD) Rear speaker: 60 + 60 watts (8 ohms at 1 kHz, 10% THD) Sub woofer: 120 watts (8 ohms at 100 Hz, 10% THD) Amplifier section Canadian model: DHC-FL7D Continuous RMS power output (reference) Front speaker: 60 + 60 watts (8 ohms at 1 kHz, 10% THD) Center speaker: 60 watts (16 ohms at 1 kHz, 10% THD) Rear speaker: 60 + 60 watts (8 ohms at 1 kHz, 10% THD) Sub woofer: 120 watts (8 ohms at 100 Hz, 10% THD) Total harmonic distortion less than 0.07% (8 ohms at 1 kHz, 35 watts) European model: DHC-FL7D DIN power output at stereo mode (rated) 45 + 45 watts (8 ohms at 1 kHz, DIN) Continuous RMS power output (reference) Front speaker: 60 + 60 watts (8 ohms at 1 kHz, 10% THD) Center speaker: 60 watts (16 ohms at 1 kHz, 10% THD) Rear speaker: 60 + 60 watts (8 ohms at 1 kHz, 10% THD) Sub woofer: 120 watts (8 ohms at 100 Hz, 10% THD) Music power output (reference) Front speaker: 120 + 120 watts (8 ohms at 1 kHz, 10% THD) Center speaker: 120 watts (16 ohms at 1 kHz, 10% THD) Rear speaker: 120 + 120 watts (8 ohms at 1 kHz, 10% THD) Sub woofer: 240 watts (8 ohms at 100 Hz, 10% THD) continued Additional Information 67GB