Sony HCD-FL7D Operating Instructions - Page 15

Getting Started x Rear speaker position and height Specify the position and height of the rear speakers. The default settings are underlined. Position diagram A B 90 A 45 B 20 • R. PL. BEHIND Select this if the rear speakers are located in the section B. • R. PL. SIDE Select this if the rear speakers are located in the section A Height diagram C C 60 D D 30 • R. HGT. LOW Select this if the rear speakers are located in the section D. • R. HGT. HIGH Select this if the rear speakers are located in the section C. Specifying the speaker parameters Use the remote for the operation. 1 From your listening position, press AMP MENU. Adjustable menus and parameters are described below. 2 Press V or v repeatedly until "LEVEL MENU" appears. 3 Press ENTER. 4 Press V or v repeatedly to select the parameter. 5 Press B or b repeatedly to select the setting you want. 6 Repeat steps 4 to 5 to set other parameters. 7 Press ENTER. Tips • You can use the digipad instead of the cursor buttons (V/v/B/b). • You can use "SPEAKER SETUP" in the Setup Display to specify the balance, level, and test tone parameters (page 30). Adjustable parameters The default settings are in the parentheses. x BALANCE • FRNT L___R: (center) Balance between the front left and right speakers. • REAR L___R: (center) Balance between the rear left and right speakers. Range: 6 steps to the left and 6 steps to the right (13 steps) continued 15GB