Sony HCD-FL7D Operating Instructions - Page 55

Tips • If acoustic feedback (howling) occurs, move the microphone away from the speakers or change the direction of the microphone. • If you want to record your voice through the microphone only, you can do so by selecting the DVD function and not playing a disc. • When high level sound signals are input, the unit automatically adjusts the recording level to prevent distortion of the recorded sound signal (Auto Level Control Function). About indicators MULTI CHANNEL DECODING indicator: Lights up except when the 2 channel source is being played back in DVD or DIGITAL function. PRO LOGIC indicator (in the display): Lights up when the unit applies Dolby Pro Logic processing to 2 channel signals in order to output the center and rear channel signals. ; DIGITAL indicator (in the display): Lights up when the unit is decoding signals recorded in the Dolby Digital format. dts indicator (in the display): Light up when DTS signals are input. Falling asleep to music - Sleep Timer You can set the system to turn off at a preset time, so you can fall asleep to music. Press SLEEP on the remote. Each time you press the button, the minute display (the turn-off time) changes as follows: AUTO* t 90 t 80 t 70 t ... t 10 t OFF * The power turns off when the current disc or tape finishes playback (for up to 100 minutes). To Check the remaining time** Change the time to turn off Cancel the Sleep Timer Press SLEEP on the remote once. SLEEP on the remote repeatedly to select the time you want. SLEEP on the remote repeatedly until "SLEEP OFF" appears. ** You cannot check the remaining time if you select "AUTO". Other Features 55GB