Sony HDWM2100/20 Operation Manual - Page 10
Upper Control Panel, POWER switch, REMOTE buttons and RS-232C indicator, RS-232C indicator
View all Sony HDWM2100/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2-1 Control Panels 2-1-1 Upper Control Panel Chapter 2 Location and Function of Parts 1 POWER switch 2 REMOTE buttons and RS-232C indicator 3 EJECT button 4 Format indicators POWER PHONES REMOTE 1(9P) 2(50P) RS-232C EJECT Z BETACAM/SP BETACAM SX MPEG IMX Digital BETACAM HDCAM 5 PHONES jack and control Cassette compartment 1 POWER switch Pressing the ' ) ' side of the switch powers the unit on. When the unit is powered on, the audio setting display section (see page 2-4) and the time data/menu display section (see page 2-6) light. 2 REMOTE buttons and RS-232C indicator Press the 1 (9P) button or 2 (50P) button to select the device controlling this unit. 1(9P): This unit is controlled by the device connected to the REMOTE 1-IN(9P) or REMOTE 1-OUT(9P) connector. The button lights when pressed. 2(50P): This unit is controlled by the device connected to the REMOTE 2 PARALLEL I/O(50P) connector. The button lights when pressed. RS-232C indicator: This indicator lights when this unit is controlled through the RS-232C connector. 3 EJECT button To eject the cassette, press this button. While the cassette is being ejected, this button lights. When using the lower control panel as remote control panel, press the DELETE button and STOP button at the same time to eject the cassette. Note Ejecting with the EJECT button is a local operation. It is not possible to eject a cassette in another unit by remote control. 2-2 Chapter 2 Location and Function of Parts 4 Format indicators The indicator (BETACAM/SP, BETACAM SX, MPEG IMX, Digital BETACAM, or HDCAM) corresponding to the current recording or playback format lights. The BETACAM/SP lights when the format is Betacam or Betacam SP. 5 PHONES jack and control Connect stereo headphones with an impedance of 8 ohms, to monitor the sound during playback and editing. The control knob adjusts the volume. It is possible to set an internal board switch so that the output volume from the MONITOR OUTPUT L and R connectors is controlled simultaneously. For details, refer to the Installation Manual.