Sony HDWM2100/20 Operation Manual - Page 67
Function Menu Item List, HOME
View all Sony HDWM2100/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
8-2 Function Menu Item List The function menu has the following items. HOME page Item F4 (CTL/TC) F5 (MENU) Setting Selects the time data to display in time data display area 1 (see page 2-6). TC: Playback time code read by the internal time code reader. The LTC or VITC time data type indicator (see page 2-6) lights.a) UB: User bits data of playback time code. The LUB or VIUB time data type indicator lights, depending on whether the time code is LTC or VITC.a) CTL: The running time of the tape being played back, as calculated from a count of CTL signals recorded on the tape. The time is displayed in Hours:Minutes:Seconds:Frames format. Puts the system into setup menu mode (see Chapter 9). When the current setup menu settings are the same as the contents of any of menu banks 1 to 3, or the factory defaults, the corresponding indication (1), (2), (3), (4), or (dflt) appears. (1): Same as menu bank 1. (2): Same as menu bank 2. (3): Same as menu bank 3. (4): Same as menu bank 4. (dflt): Same as factory defaults. a) The selection of LTC or VITC depends on the setting of F6 (TCR) in function menu page 1 . Page 1 Item F4 (DF) F6 (TCR) Setting In 59.94i, 29.97PsF mode, selects either drop-frame mode or non-drop frame mode for the time code generator and the CTL counter. DF: Drop-frame mode NDF: Non-drop frame mode Selects the type of time code to display in the time data display. LTC: Display LTC. AUTO: Display VITC when tape speed is 1/2 or less of normal speed, and LTC otherwise. VITC: Display VITC. Chapter 8 Function Menu 8-3 Chapter 8 Function Menu