Sony HDWM2100/20 Operation Manual - Page 90
% to 7.5% to 10.0
View all Sony HDWM2100/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
9-4 Items in the Extended Setup Menu Menu items in the range 700 to 799, relating to video control (Continued) Item number Item name 709 CAV LEVEL FORMAT (Valid only in 59.94i or 29.97PsF mode.) Sub-item 0 OUTPUT CAV LEVEL 710 INTERNAL VIDEO SIGNAL GENERATOR 712 VIDEO PROCESS ON CAP LOCK 2FIELD (Invalid in 24PsF or 23.98PsF mode.) Settings Select whether the analog component output should be D-1 or Betacam. Format Color bars Y video Y sync R-Y/B-Y D-1 CAV 100/0/100/0 700 mV 300 mV 700 mV Betacam 100/7.5/77/7.5 714 mV 286 mV 700 mV Select the analog component output format. B-CAM : Betacam D1: D-1 Select the test signal to be output from the VTR's internal test signal generator. OFF : No test signal is generated. CB : Color bar signal MLTBS: Multi-burst signal 10STP: 10-step signal PLSBR: Pulse and bar signal RAMP: Ramp signal BLACK: Black signal When the function menu item CAPSTN or setup menu item 106 is set to 2F for 2field playback, select whether or not to carry out a "picture shift". OFF : No picture shift ON: Carry out picture shift. Note To eliminate the adverse effect of the residual chrominance subcarrier component in the Y signal that is the result of the Y/C separation, this unit automatically applies a shift to the playback image in the H direction, so that even in 2-field playback a satisfactory image can be obtained. 713 VIDEO SETUP Set the video setup amounts to be removed from a Betacam playback signal and REFERENCE LEVEL to be added to a composite output signal. There are independent settings for a (Valid only in 59.94i, Betacam signal and a composite output signal (referred to below as the output 29.97PsF mode.) signal). Sub-item 0 MASTER LEVEL 1 BETACAM PB LEVEL 2 OUTPUT LEVEL Note The setup amounts specified in this menu item have no connection with the function menu item SETUP/BLACK. When the Betacam playback signal and output signal settings are "MSTER" (master), the setup amount specified for this sub-item is removed from the Betacam playback signal and is added to the output signal. 0.0% to 7.5% to 10.0%: Setting in this range, in 0.5% increments. MSTER : Set the Betacam playback signal to the master setting. 0.0% to 7.5% to 10.0%: Set the setup amount to be removed from the Betacam playback signal in this range, in 0.5% increments. MSTER : Set the output signal to the master setting. 0.0% to 7.5% to 10.0%: Set the setup amount to be added to the output signal in this range, in 0.5% increments. (Continued) Chapter 9 Setup Menus 9-20 Chapter 9 Setup Menus