Sony HDWM2100/20 Operation Manual - Page 81
Item number, Settings, TYPE1, AUDIO, F-KEY, Continued
View all Sony HDWM2100/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Menu items in the range 100 to 199, relating to the control panels (Continued) Item number Item name Settings 111 TSO PLAY Select whether or not to enable tape speed override mode. DIS : Disable tape speed override mode. TSO: Enable tape speed override mode. 116 JOG DIAL RESPONSE Select the tape speed characteristics for the search dial rotation rate (VTR commands). TYPE1 : Tape speed varies linearly over the range -1 to +1. TYPE2: Tape speed varies stepwise as shown in figurea) below over the range -3 to +3. (Characterized by a zone around -1 to +1 where the tape speed is independent of the search dial rotation rate. When playing back an HDCAM tape, however, tape speed characteristic TYPE 4 applies.) TYPE3: Tape speed varies linearly over the range -3 to +3, as shown in figureb) below. TYPE4: Tape speed varies stepwise as shown in figurec) below over the range -2 to +2. (Characterized by a zone around -1 to +1 where the tape speed is independent of the search dial rotation rate) 117 CONTROL PANEL Select the control panel function when the PANEL SELECT switch on the switch SELECTION panel is set to REAR. SW : Only the control panel connected to the CONTROL PANEL connector on the connector panel functions. PARA : The control panels connected to the CONTROL PANEL connectors on the switch panel and connector panel both function. 118 KEY INHIBIT SWITCH Select which switches and buttons can be operated when the KEY INHI switch on EFFECTIVE AREA the switch panel is set to ON. The following sub-items control different sets of Sub-item switches and buttons independently. 1 REMOTE SELECT Select whether the REMOTE 1(9P) and 2(50P) buttons in the upper control panel are enabled. DIS : Disabled ENA: Enabled 2 AUDIO/F-KEY Select whether the audio monitor signal selection buttons and F1 to F6 buttons in the lower control panel are enabled. DIS : Disabled ENA: Enabled AUDIO: The monitor signal selection do not function. F-KEY: The function key (including HOME) do not function. 3 MODE CONTROL Select which switch and button operations can be carried out from the lower control panel of this unit or an external control panel connected to this unit. DIS : All switches and buttons are disabled. EDIT: All switches and buttons for editing operations other than the audio monitor signal selection buttons and F1 to F6 buttons are disabled. ENA: All switches and buttons other than the audio monitor signal selection buttons and F1 to F6 buttons are enabled. a) TYPE 2 Speed +3 FWD (reverse) RVS +1 -1 -3 RVS b) TYPE 3 Speed +3 FWD Rotation rate FWD (forward) RVS -3 RVS c) TYPE 4 Speed FWD +2 Rotation rate +1 FWD RVS -1 -2 RVS Rotation rate FWD (Continued) Chapter 9 Setup Menus 9-11 Chapter 9 Setup Menus