Sony HDWM2100/20 Operation Manual - Page 111
HD/SD video output phase settings, you can use, the maintenance menu.
View all Sony HDWM2100/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Appendix HD/SD video output phase settings For the HD/SD video output phase setting, you can use the maintenance menu. For details, refer to the Installation Manual. Item number Item name M3 M3A: OUTPUT M3A0: HD PHASE SEL PHASE SELECT M3A1: SD PHASE SEL M3A2: SD UPCNV SEL Settings Select the HD video output signal phase with respect to the reference signal: 0H or -90H (HD) advanced. 0H : Output in sync with the reference signal. -90H: Output with the phase delayed by -90H (HD) with respect to the reference signal. Select the SD video output signal phase with respect to the reference signal: 0H or -2H (SD) advanced. 0H : Output in sync with the reference signal. -2H: Output with the phase delayed by -2H (SD) with respect to the reference signal. Select whether the SD video output signal phase in SD tape playback should be in sync or one frame delayed. noml : Output the SD video with the phase unchanged. (The HD video output is delayed by one frame with respect to the reference signal.) HD: Output the SD video with the phase delayed by one frame. (The HD video output and SD video output are in phase with the reference signal.) Note The SDSDI (D1) output and component/composite outputs have the same phase. For details of the audio/timecode output phase, see Setup menu item 338. Appendix A-7