Sony HDWM2100/20 Operation Manual - Page 28
Superimposed Character Information
View all Sony HDWM2100/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3-3 Superimposed Character Information When the function menu item CHARA is set to ON, the video signal output from the HDSDI OUTPUT 3 (SUPER) connector, SDI OUTPUT 3 (SUPER) connector, or COMPOSITE VIDEO OUTPUT 3 (SUPER) connector contains superimposed character information, including time code, menu settings, and alarm messages. Adjusting the character display You can adjust the position, size and type of the superimposed characters using setup menu items 002, 003, 005, 009, and 011. For details, see Section 9-3 "Items in the Basic Setup Menu" (page 9-7). Information displayed 1 Type of time data 2 Time code reader drop frame mark (for 59.94i, 29.97PsF mode only) Time data 3 VITC field mark TCR . 2 3 : 5 9 . 4 0 . 1 8 * SHUT T L E ST I L L 4 Operation mode Chapter 3 Preparations Note The display shown above corresponds to the factory default settings of the unit. Changing the setting of setup menu item 005 allows different time data to be displayed in the lower line of the display. For details, see Section 9-3 "Items in the Basic Setup Menu" (page 9-7). 1 Type of time data Display CTL TCR UBR TCR. UBR. IN OUT AI AO DUR Meaning CTL counter data LTC reader time code LTC reader user's bits VITC reader time code VITC reader user's bits IN point OUT point Audio IN point Audio OUT point Duration between any two of the four edit points (IN, OUT, audio IN, audio OUT) Note If the time data or user's bits cannot be read correctly, they will be displayed with an asterisk. For example, "T*R", "U*R", "T*R." or "U*R.". 3-4 Chapter 3 Preparations