Sony HDWM2100/20 Operation Manual - Page 20
Memory card slot, Memory card ejection button, CONTROL PANEL connector 10-pin, round
View all Sony HDWM2100/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 2 Location and Function of Parts 2-1 Control Panels 1 Memory card slot Insert a memory card to update this unit's firmware. You can save or load setup menu settings onto the memory card. For details on firmware update and setup menu reading/ storing, refer to the Maintenance Manual Volume 1. 2 Memory card ejection button Press to eject a memory card from the memory card slot. 3 CONTROL PANEL connector (10-pin, round type) Plug in the lower control panel connection cable. 4 PANEL SELECT switch In addition to the lower control panel, you can connect a similar control panel to this unit. When two control panels are connected to the unit, the PANEL SELECT switch is used to specify which panel be enabled to control the unit. FRONT: Enables the control panel connected to the CONTROL PANEL connector on the switch panel. REAR: Enables the control panel connected to the CONTROL PANEL connector on the connector panel. When setup menu item 117 is set to PARA, this switch position also enables the control panel connected to the CONTROL PANEL connector on the switch panel. 5 KEY INHI switch Moving this switch to the ON position disables the controls on the upper and lower control panels. You can specify which buttons and knobs are disabled in setup menu item 118. 6 Memory stick slot Use this to update the firmware. You can also save or load setup menu settings onto the memory stick. Note After inserting a memory stick or memory card, allow at least five seconds to elapse before removing it. For details on firmware update and save or load setup menu settings, refer to the Maintenance Manual Volume 1. 2-12 Chapter 2 Location and Function of Parts