Sony KP-46WT520 Operating Instructions - Page 20

SETUP Setup SETUP To connect the cable box and cable 1 Connect the cable from your cable company to the TV's VHF/UHF jack. 2 Use a coaxial cable to connect the TV's TO CONVERTER jack to the cable box's input jack. (The TV's internal converter lets you switch between unscrambled signals coming straight into the TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter.) 3 Use a coaxial cable to connect the cable box's output jack to the TV's AUX jack. 4 Run Auto Program, as described in "Setting Up the Channel List" on page 39. If you have a digital cable box, you cannot use this connection because the TO CONVERTER jack is not compatible with digital cable boxes. Cable box Coaxial cable TV IN OUT 3 AUX 2 Coaxial cable 1 TO CONVERTER Cable (unscrambled channels) VHF/UHF Notes on Using This Connection To Do This ... Do This ... Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then use the cable box to switch channels. Set up the TV remote control Program the remote control. See "Programming the Remote Control" on to operate the cable box pages 46-47. Activate the remote control to Press SAT/CABLE FUNCTION. operate the cable box Prevent the accidental switching of TV channels When using the cable box, you need the TV to stay on the channel the cable box is set to (usually channel 3 or 4). You can use the TV's Channel Fix feature to lock in a specific channel. For details, see "Using the Channel Menu" on page 67. Switch the TV's input between the cable box and cable Press ANT to switch back and forth between the TV's VHF/UHF and AUX inputs. SETUP SETUP SETUP 19