Sony KP-46WT520 Operating Instructions - Page 40
Setting Up the Channel List, Using Auto Program, Using Auto, Program
View all Sony KP-46WT520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
SETUP Setup Setting Up the Channel List After you finish connecting the TV, you need to run the Auto Program feature, which automatically creates a list of available channels. The Auto Program screens appear when you turn on your TV for the first time after hooking it up. Using Auto Program To run Auto Program the first time you turn on your TV 1 Press POWER to turn on the TV. The Initial Setup screen appears. 2 When prompted to start Auto Program, press the CH+ button to start Auto Program. To run Auto Program again at a later time ❑ Use the Auto Program feature as described on page 67. To reset the TV to factory settings 1 Press POWER to turn on the TV. 2 Hold down RESET on the remote control. 3 Press TV POWER on the TV. (The TV will turn itself off, then back on.) 4 Release RESET. SETUP SETUP SETUP SETUP 39