Sony LBT-ZUX9 Operating Instructions - Page 59
Specifications
View all Sony LBT-ZUX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Specifications AUDIO POWER SPECIFICATION POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6-ohm loads, both channels driven, from 120 Hz - 10 kHz; rates 160 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 miliwatts to rated output. Amplifier section The following are measured at AC 120 V, 60 Hz Front/Surround speaker RMS output power (reference): 250 W + 250 W (per channel at 6 Ω, 1 kHz, 10% THD) Inputs VIDEO (AUDIO IN) L/R : Voltage 250 mV, impedance 47 kilohms AUDIO (AUDIO IN) L/R: Voltage 450 mV, impedance 47 kilohms MIC: Sensitivity 1 mV, impedance 10 kilohms (USB) port: Type A Outputs PHONES: accepts headphones of 8 ohms or more Disc player section System Compact disc and digital audio system Laser Semiconductor laser (λ = 770 - 810 nm) Emission duration: continuous Laser Output Max. 44.6 µW* * This output is the value measured at a distance of 7 7/8 in (200 mm) from the objective lens surface on the Optical Pick-up Block with 9/32 in (7 mm) aperture. Frequency response 2 Hz - 20 kHz Wave length 770 - 810 nm Signal-to-noise ratio More than 90 dB Dynamic range More than 88 dB Tape deck section Recording system 4-track 2-channel stereo Frequency response 50 - 13,000 Hz (±3 dB), using Sony TYPE I tape Wow and flutter ±0.35% W.Peak (IEC) 0.3% W.RMS (NAB) ±0.4% W.Peak (DIN) Additional Information Continued l 59US