Sony LF-B1 Operating Instructions (LF-PK1) - Page 27

Watching TV and Videos on LocationFree Player Selecting a Secondary Audio Program (SAP) The secondary audio program (SAP) mode is available for broadcasts that include multiple audio tracks. When a TV program with multiple audio tracks is tuned in, click [SAP] repeatedly at the bottom of the window to switch among audio tracks. Each time the [SAP] button is clicked, [STEREO] or [SAP] appears on the window. z Tip To select an SAP option for external equipment, use the remote supplied with the connected equipment. However, some devices can be operated with the onscreen remote control. Adjusting the Video Rate You can adjust the streaming rate according to the bandwidth available on your communications connection. This allows you to watch video with the optimum quality. Normally, selecting [Auto] sets the optimal video rate in accordance with available bandwidth. When selecting a rate manually, note that a higher rate results in higher picture quality, but a higher (larger number) rate requires a larger bandwidth and video will tend to keep stopping and starting if there is insufficient bandwidth for the higher rate. 1 Click [Rate] at the bottom of the window. The [Change Rate] window appears. 2 Click a rate, and then click [OK]. Manual rate Note When you switch between [Auto] and [Manual], change the rate from [1] or [6] to another rate, or change from another rate to [1] or [6] while connected, the NetAV connection may be disconnected and then reconnected automatically in some cases. 27