Sony LF-B1 Operating Instructions (LF-PK1) - Page 31

Setting Up LocationFree Player Configuring the Remote Control for Video 1 and Video 2 1 Click anywhere in the window to display the index, then select [Settings] at the bottom right of the window. 2 Select [TV/Video Settings], [Remote Settings], and then [Video 1] or [Video 2]. 1 2 3 When connecting an all-in-one video device, such as a VCR+DVD player The second remote is automatically set when you select a device displayed as an all-in-one device from the [Type] list (e.g., Sony "VCR+DVD player"). Select the [Switch] button on the on-screen remote to switch between the remote control of the VCR and that of the DVD player. 3 Click [OK] or [Apply]. Click [OK] to enable the settings and close the [Settings] window. Click [Apply] to enable the settings without closing the [Settings] window. z Tip After configuring the remote control for Video 1 and Video 2, the [Video 1] and [Video 2] options in the [index] window change to their set remote control names. 1 Select the make of the connected device. 2 Select the type of the connected device. 3 If the configuration above is correct, each time you click [Power], you can turn on or off your device. After clicking [Power], it takes five seconds or more for the device to respond. If it does not work, make sure that the make and type are correct, and then try again. Notes • Even if the power turns on and off correctly with [Power], other buttons may not be enabled. If this happens, select [Video 1] or [Video 2] from the Index. With the on-screen remote, confirm that the buttons are enabled. • Some devices may not have a [Power] button (e.g. DVR). In this case, as well, use the onscreen remote to display [Video 1] or [Video 2] and confirm that the buttons are enabled. When connecting two devices to Video 1 or Video 2 Configure the remote control settings for each remote. 31